FRIT
[ Back ] [ SAFETY AND LINKS ] [ PRICING ] [ FUSING TESTS ] [ STRINGER ] [ FRIT ] [ AVAILABLE NOW ] [ FAQ ] [ STEPPING STONE SLABS ] [ JEWELRY ] [ STAINED GLASS SHEET ]

October 5, 2004----- I just finished fritting vaseline glass and am in the process of packaging, labeling, testing and photographing. I should be finished by Oct. 8.

I have a total of 70 lbs available.

Prices are per pound. 

Packaged in top quality hard plastic reusable containers.

1/2 lb  minimum.

COE is approximately 95. This batch will likely NOT fit Bullseye "Tested Compatible" or Uroboros 90, at full fuse. Tacking should work.

 It will probably work with 96 COE as my previous tests have shown. As usual, testing is recommended.

VASELINE 

.007 -- .030    25.00 lb

.030 -- .050    25.00 lb

.050 -- .080    25.00 lb

.080 -- .110    20.00 lb

.110 -- .170    20.00 lb

.170 -- .250    20.00 lb

The Green vaseline color will be a very pale green tint,  almost clear, until lit with a black-light. It glows green at all stages.

1. Single fire transparent---This will fire transparent the first firing. Any further high firings and it will turn opalescent. Check my fuse test page. I will post more photos here as I finished trials.

2. Single fire opalescent---Pre-fired and will strike opalescent.

The yellow/orange will be light amber and will glow orange. It stikes to a bright red, and may have opalescent swirls.

All of my frits are compatible with my transparent colors.

Non of my opal colors are particularly suitable for fusing.